I spied these toddler overalls at a local thrift store recently and couldn’t resist…how sweet would these be embellished with bright cotton print around the cuffs? The past couple of craft fairs had me wishing that I had more pieces for children, and indeed, they’re a lot of fun to put together. Much of the children’s thrift store clothing that I see is in hardly worn condition, perfect for a makeover. And many people really seem to enjoy seeking out special items for the children in their lives. Buttons in lieu of studs, and bright cotton print in lieu of lace and what do we have? Little Betty!
Most of the time I seem to have too much on my plate to commit to a major creation, so I lean toward simple ones that can be completed in a single sitting. Alas, this same situation applies to the songs I come up with, but I feel happier completing something rather than nothing, and I suspect that this is true for many. I also lean toward reuse, and simple hats certainly qualify here.
The three hats pictured are super easy creations that are fun to do and can be put together in under an hour. Below is a stretchy beret style hat that consists of six pie shaped panels cut from an old sweatshirt. These were sewn together to make a circle, which was then gathered and pinned onto the band, which is simply two old socks less the feet. Stitch these two pieces together, and you’ve got a new hat!
The retro brown-orange hat with green band was put together in the same way, both fabrics from stretchy knit ts and tanks. Doubling the band fabric gives it stability and a more finished look.
The last hat has a little bit of a backstory to it…
A few years ago my band https://www.facebook.com/betterbettyrocker was planning a casual photo shoot, and naturally the topic of what to wear came up. We decided on black and white, with some sort of hat. I thought I might like to wear a pillbox style hat, but found vintage ones to be more than I wanted to spend just for this occasion. After band practice one day, I was lamenting this situation to Carolyn and she said that I would probably just make one out of an oatmeal box…it’s exactly what I did!
With a glue gun I attached an old linen napkin, lace, braid and faux pearls. It was a bit heavy, not perfect, and indeed had to be pinned to my hair for the photos but for that purpose was just the ticket-and so much fun!
If time ever permits I’d love to try my hand at a more serious endeavor. Do you have a favorite funny hat of your own?
You can make these comfy, cozy slipper socks in a single afternoon! The really great thing about this easy knitting project is that it’s calming, gives you a chance to catch up on your favorite listening and results in a great handmade gift for a friend!
Even if you’re unfamiliar with loom knitting, you can do this. I would recommend first viewing this video, which will show you in a few minutes the basic e wrap stitch, which is used on the slipper sock from ankle to toe. https://www.youtube.com/watch?v=7DVRbwzQm7A
A few words about yarn. I doubled the lighter weight green yarn used on the cuffs. It more closely follows the medium bulk of the heel and foot. For the toe I went to a lighter yarn and a single strand. The toe, of course, is cinched up and makes the decrease easier with less bulk. All the yarn shown here is washable wool blend, lovely soft. You can use whatever you like, but I find the 100% acrylics not quite so soft a feel.
Onward to the cuff…
E wrap a single row, referring to above referenced video if you need. For the next 12 rows, you’ll alternate knit and purl stitches in each row. k,p,k,p,k,p etc. If you’ve not done this on a loom, you’ll work to the right with working yarn in front. The first peg to the right of the anchor will be knit. For the knit stitch the hook reaches under the wrapped loop, and grabs the working yarn from above, gets pulled down and knit off. The next stitch is purled, and the process is reversed. The hook will go behind the loop from the top, reaching down to grab the working yarn. Knit and purl alternately for 12 rows. Leaving a tail five inches or so, cut the cuff working yarn and double knot to ankle/foot yarn.
I would be so lost without my little knitting counter friend!
The ankle is simple and quick…just e wrap knit 5 rows. This usually takes me two or three songs to do.
The next thing to do is mark the 13th peg. I’ve used a green wire tie here, and this works fine. Now is the time to leave a yarn tail, cut the cuff yarn, and double knot the heel yarn. For the heel, you’ll only be working pegs 1-12, and will e wrap back and forth between them for 4 rows. Always start on adjacent peg, and do knit the last peg.
To decrease heel and reattach to loom, you’ll leave your (13th peg) marker on and, beginning at the 12th peg, pull that loop onto the adjacent (11th) peg. Go to peg one, wrap (peg 11 as well, even though it will have three loops on it) and work the row, treating the bottom two loops on peg 11 as a single loop. Then go to peg 1, moving it to adjacent peg 2 and following the above instruction until there are three empty pegs per side.
To reattach your knitting to the loom, with your hook take a top edge loop of yarn closest to peg that’s holding the ankle knitting and put on that peg (it will eliminate holes). Same thing for remaining six empty pegs. This part can be a bit of a challenge, but take your time to “see” the best way to spread out the heel knitting over the pegs and it will be fine. Also, if there are any holes in the heel/ankle/foot area, those long tails from changing yarn make stitching the hole shut an easy matter.
Once you’ve got your knitting reattached, cut a long tail and switch back to yarn that was used for the ankle. Double knot, and e wrap all round the loom. You’ll now remove that marker from peg 13, and notice that your number one peg is now on peg 4. There will be three loops on a couple of the pegs, treat the bottom two as if they were a single loop.
From here until the toe, knit as many rows as desired. On a medium bulky yarn, I find 22 rows equates to about a womens 7.5. As you approach the end of the foot, make certain the knitting is not too tight. The toe will consist of three additional rows.
When you reach the toe, cut a tail several inches long and tie on the yarn you’ll use for this. Best to use a yarn about half the thickness of the foot yarn. Double knot, and move every other peg onto the adjacent peg to the right. Then “weave” the working yarn in front of the pegs with loops and behind the empties. Not too tight. Then knit the double loops over. Pulling one peg over at a time is easier than both at once.
Do the next two rows the very same way, remembering to keep yarn loose for ease.
Leave a tail about one and a half times the loom diameter and thread onto your flexible yarn needle. Go through all loops, and once again through first loop. At this point you can remove knitting from loom and turn inside out to close (drawstring) as well as weave in all tails and stitch any holes that may exist. If you’ve not used this drawstring method, here’s an excellent lesson in doing so http://www.loomahat.com/how-to-loom-knit-a-hat/close/ .
This week I am taking a look at another tool I like using in conjunction with small knitting and sewing projects. It is a spool knitter, also called a French knitter. The cute one I have pictured above isn’t vintage at all, but they’ve been around for a long time https://en.wikipedia.org/wiki/Spool_knitting and are a quite flexible, and useful form of knitting. With a tiny knitter like this, the cable that comes out of the tube goes quickly. I found a great tutorial using this same tiny version that I have https://www.youtube.com/watch?v=rzjGPRWAaRU .
The silk handle on this small fabric bag was easily fashioned:
A longer handle made from the same yarn the bag was knit from:
Like the flower loom, I like having this in my toolbox for its compact size.
I’d enjoy seeing and hearing about your own spool knit projects!
Did you enjoy making square loomed potholders with yarn loops when you were a child? There are some fun retro crafting tools in circulation, as well as new takes on some of the older ones.
This round Hazel Pearson flower loom from the 1960s was a lucky thrift store find a few years ago. In fact there were two identical looms included in the purchase; the other was gifted to my very clever friend Mary, who seems able to craft anything out of thin air-loom or no!
Check out this page on knitting-and.com http://www.knitting-and.com/small-looms/loomsandyarns.htm to see what’s possible with these flower looms-beautiful things that could be used in conjunction with many projects. Apparently the loom was designed originally for use with raffia to make the straw flowers so popular back then, and indeed some beautiful examples are to be seen on knitting-and.com.
I’ve not yet made raffia flowers. These simple yarn flowers I’ve made are sewn on casual fabric and knitted bags, but I’ve also used them to jazz up the side of a basic knitted hat.
Clover has some great knitting tools (I have their little counter that I love), and indeed they make a modern version of the flower loom https://cloverusa.wordpress.com/tag/flower-loom/ should you desire one and are unable to find an original.
I enjoy this compact little vintage Hazel’s Loom down to its lovely pale yellow color! Do you have a favorite old school crafting tool?
Next week I will look at another useful little vintage crafting tool.